Tangent Scale Models HO 60127-02 DSI/SLCC Bay Window Caboose Conrail N7A Blue Repaint 1979+ CR #21607

Description

Please note picture is representative of the item but may not be same road number. Always refer to product description for actual product details.
Tangent Scale Models HO 60127-02 DSI/SLCC Bay Window Caboose Conrail N7A Blue Repaint 1979+ CR #21607

Road Specific Features:

Conrail ‘N7A Blue Repaint 1979+’ is the second of our Conrail-era offerings in this run. These Conrail cabooses represent the CR repaints that were performed in 1979. These cabooses received a similar Conrail blue paint job as found in our 1977 caboose offering.  However, these cabooses include accurate red and white red ‘Scotchlight’ stripe rectangles on the ends for visibility.  Conrail removed the PC-era end marker lights when these cabooses were rehabbed, and instead substituted a single orange FRA-flasher light, mounted on end of the car, which works on our model. Yes, the 1977+ and 1979+ Conrail cabooses operated concurrently, and with PC cabooses, we might add. Finally, Conrail replaced the plain bearing trucks with 70-ton roller bearing trucks. Each has accurate and distinctive lettering detail and smokejack offerings to represent the four prototypical numbers offered.

Model Features:

• Scale: HO Scale 1:87.1
• Truck: Tangent 70-ton Gould plain-bearing trucks with separate brake beam parts
• Wheels: CNC-machined standard RP25 .110” tread 33” wheels
• DC/DCC Lighting Features: Interior Lights

Features for the Tangent DSI/SLCC Steel Bay Window Caboose replicas include:

• Dimensional accuracy – designed from actual blueprints and meticulous field dimensions
• Highly correct ‘true to life’ colors
• ‘Hyper-Accurate’ lettering including exact fonts and lettering placement
• Genuine Kadee scale couplers
• ‘Near-scale’ draft gear box with beautifully-rendered side ‘key’ detail
• Multiple road numbers for each scheme as appropriate
• Era-specific body details, including multiple body roof and end window combinations
• Wood, Apex ‘see through’ or no roof running boards/etch metal running board supports as appropriate for the era
• Railroad and era-specific ladder roof hand holds: Round, square, and none
• Multiple roof equipment options including locker vents, radio antenna and toilet vent
• End steps to match the prototype: Kass, Diamond, or ‘see through’ Apex
• Two different end walkways platforms – Diamond and Kass – based on the prototype
• Fine etch metal end window screens, where appropriate
• 13 different end railing/safety appliances options, based on railroad and era
• 7 different smokejacks to cover DSI, SLCC, PC and other replacement options
• Unlit NYC/ITC oil lantern and NYC pyle light options on the corner handrail posts where appropriate
• Illuminated scale-sized PC and CR era end marker lights that can be controlled on or off – on each end – independently, where appropriate
• Illuminated scale-sized CR and ITC late-era FRA end lights with a proper slow flash/prototype ‘decay’ that can be controlled on or off – on each end – independently, where appropriate
• Multiple side oil fill and overflow pipe options based on the prototype and era
• Two ‘coupler lift bar’ options per prototype application and era
• Railroad specific battery/equipment box options
• 4 different toilet pipe options based on the prototype and era
• Windshield wipers applied to bay windows based on era and prototype use
• Full railroad-specific interior – chairs, bunks, desks, lockers, sink and even 2 stove options The interior is accurately apportioned and fully-painted with railroad and era-specific detailing. From the signature ITC double bunks to the NYC fold-down table and tufted cushions.
• Full underbody details – brake system with brake rods and piping, battery box, electrical plugs and conduit, water fills, axle generator and more – all based on the prototype and era
• Beautiful side details – wire grab irons, wire ladder rungs, wire roof hand holds, and wire coupler lift bars – NO ‘molded in’ plastic grab irons
• Separate air hoses with mounting bracket detail
• No complicated decoder. No complicated programming. No complicated electronics. DC/DCC compatible track-powered ‘no fuss’ interior and marker light lighting – simple and easy to operate with included wand
• ‘Warm’ color LED lights for that ‘incandescent bulb’ look of the prototype
• CNC-machined standard RP25 .110” tread 33” wheels
• All-New precision Tangent Scale Models 70-ton Gould plain-bearing trucks with separate brake beam part, or Barber 70-Ton Gould roller-bearing trucks with separate brake beam parts, as appropriate for each paint scheme

Lombard Hobbies - Modelers Helping Modelers for Over 40 years!