Micro Trains Line N 00132040 (1152) Locomotive Coupler Conversion Kit with Pilot Face RS3 - 1 Pair

Description

Micro Trains Line N 00132040 (1152) Locomotive Coupler Conversion Kit with Pilot Face RS3 - 1 Pair

001 32 040 is formerly MTL Part Number 1152

Package includes one front and one rear coupler.

This conversion fits: Atlas RS-3 Locomotives.

NOTE: This kit includes a pair of #1027 couplers for curved track of 12” radius or more, plus a pair of #1025 knuckle & lip shanks for use on layouts with radii of less than 12-inches. Use the coupler that best fits your particular need. The #1027 coupler is assembled. If using the #1025 knuckle & lip shanks, disassemble the #1027 coupler & install the #1025 knuckle & lip shanks in the #1027 draft gear box. (Fig. 1).

This conversion requires the use of a #62 (.038” or .96mm) dia. tap drill, a #56 (.046” or 1.2mm) dia. clearance drill, and a 00-90 tap  These tools are available in Micro Trains Line N 98800121 (1059) Tap and Drill Set

Don’t forget these other helpful tools for your MicroTrains coupler installations:

• Micro Trains Line N 98800081 (1050) N Scale Coupler Starter Kit

• Micro Trains Line N 98800031 (1055) Coupler Height Gauge 

• Micro Trains Line N 98800121 (1059) Tap and Drill Set

• Micro Trains Line N 98800034 (1056) Trip Pin Height Gauge

• Micro Trains Line N 00112020 (1956) Multi-Purpose Screws

Need a MTL Coupler or Part You Don't See?  We get shipments in weekly and can have the item you need fast.  Just place a special order with us by clicking here.

Lombard Hobbies - Modelers Helping Modelers for Over 40 years!