ScaleTrains N
ScaleTrains Rivet Counter N SXT39082 DCC Ready GE AC4400CW Locomotive BNSF 'Heritage II' Scheme BNSF #5620
- In Stock:
- 3
- Scale:
- N
- SKU:
- SXT39082
Description
Please note picture is representative of the item but may not be same road number. Always refer to product description for actual product details.
ScaleTrains Rivet Counter N SXT39082 DCC Ready GE AC4400CW Locomotive
BNSF 'Heritage II' Scheme BNSF #5620
Road Number Specific ScaleTrains
- All-new model
- Era: 2003 to Mid-2010s
- Series 5603 to 5653; built 4-5/03
- Road numbers 5603, 5609, 5620, 5632, 5635 and 5652
- Fully-assembled
- Multiple road numbers
- GE safety cab with “gull-wing” roof profile and four (4) side windows
- LED-illuminated front deck-mounted ditch lights
- LED-illuminated high-mount cab number boards*
- Directional LED-illuminated headlights
- Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more
- Short snowplow with open doors and grab irons
- Semi-scale Type E knuckle couplers – Micro-Trains compatible
- Body mounted coupler box – accepts Micro-Trains 1015/1016 type couplers without modification
- 5-step stepwells
- Walkway with front anticlimber
- GE “nub” pattern walkway tread
- Narrow profile end handrails
- Nose door with window
- Two-piece nose top grab irons
- Front LED-illuminated headlight with lenses on low short hood (low headlight)
- Battery cabinet access door with latch
- Right side cab under floor access doors: dual large louver panels per door
- Left side cab under floor access doors: bolted panel forward of the HVAC unit
- Detailed cab interior with floor, rear wall, seats, and desktop
- Tinted cab side windows
- Octagonal antenna dome
- Late: two (2) tall welded X-panels and three (3) large bolted X-panels underneath
- Continuous reinforcement rib under dynamic brake intake grilles
- Standard dynamic brake exhaust (2-port)
- Rearward right-side air intake grille
- Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door
- Capacitor box on left side walkway
- Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors
- Late angled engine cab profile with tri-fold power assembly access doors
- Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab
- “Bathtub” exhaust silencer
- 2 individually applied etched metal radiator exhaust grilles.
- Right side late radiator door grilles in alternating heights
- Standard brake wheel
- Left rear hood door grille arrangement: tall, short, short grilles
- Tall, latched access door on long hood end
- High-mounted rear sandfiller
- Late angled lifting “tabs” on ends of radiator wings
- Rear LED-illuminated vertical headlight with lenses
- Accurately profiled frame with separately applied plumbing and traction motor cabling
- GE Hi-Ad trucks with separately applied brake cylinders and air plumbing
- Dual Graham-White (Salem) 824-100 centrifugal air filters
- No air dryer
- 5,000 gallon fuel tank
- Dual fuel fills per side
- Round and vertical analog fuel gauges
- Fuel tank mounted steel bell
- Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover
- Early square handbrake chain bracket
- Spare coupler knuckle holders on rear pilot face
- Motor with 5-pole skew wound armature
- Dual flywheels
- All-wheel drive
- All-wheel electrical pick-up
- Printing and lettering legible under magnification
- Operates on Code 55 and 80 rail
- Packaging safely stores model
- Minimum Radius: 9 ¾”
- Recommended Radius: 11”
DCC & sound equipped locomotives also feature:**
- ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle”
- Cube-type speaker
- Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more
- Operates on both DC and DCC layouts
DC/DCC ready locomotives also feature:**
- Operates on DC layouts**
- DCC ready with Nano connector
* Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC
** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate**
**Lombard Hobbies Recommendation - As modelers ourselves we highly recommend ONLY running DCC on DCC systems and DC on DC systems, regardless of 'Dual-Mode' capability. This gives optimum performance and safeguards the unit from possible damage from running on a different system than originally intended and from any inexperienced operator errors.
PROTOTYPE HISTORY
Lombard Hobbies - Your #1 Largest Authorized ScaleTrains Select Retailer!