ScaleTrains Rivet Counter HO SXT39840 DCC Ready EMD SD40T-2 Southern Pacific 'As Delivered w/88" Nose' SP #8233

Description

Please note picture is representative of the item but may not be same road number. Always refer to product description for actual product details.

ScaleTrains Rivet Counter HO SXT39840 DCC Ready EMD SD40T-2

Southern Pacific 'As Delivered w/88" Nose' SP #8233

Road Number Specific ScaleTrains

• New road numbers 
• Era: 1980s 
• SP Series 8230 to 8299; built 3-7:1980
• Fully-assembled 
• Multiple road numbers
• No truck ground lights (prototype not equipped)
• LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct*
• Equipped with either:
  • LED-illuminated front and rear red LED Pyle-National 17540 “UDE” Gyralites*
  • LED-illuminated front and rear dual LED Pyle-National 20585 (Translite) “Gyralite” signal light*
• LED-illuminated front and rear stand-off tri-color class lights**
• Printed number boards with separately controlled backlit LED-illumination*
• Directional LED headlights
• Front late SP/UP-style pilot plow with MU hose doors and grab irons
• Front and rear 3-hose MU hose clusters with silver gladhands
• Front "tall" stepwells with see-through steps and rear “ladder” steps
• 88” low short hood with wheel handbrake
• Bolted battery box doors with wide louvers
• Late cab sub-base doors with lift-off hinges
• SP nose headlight package 
• Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and “L” front window
• Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
• Original cab front door 
• Sliding cab side windows
• Standard Mirror mounted fore of cab side windows, both sides
• Rear cab side vent on left side
• Standard EMD sunshades and long sunshade tracks
• Vapor Corp. cab roof HVAC
• Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket; offset to engineer’s side and mounted on number board housing
• “Whip” radio antenna mounted on ground plane over dust bin
• Late electrical cabinet "zig-zag" seam, closer to rear of cab
• Welded ECAFB (late)
• Late inertial air intake grilles with top and bottom drip rail
• "Post 1980" extended-range dynamic brake with exhaust silencer
• Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets
• Straight rear uncoupling lever with four mounting brackets
• Handrail set with anticlimber front; inward facing rear end rail mounting brackets and chain
• Handrail ends and step faces painted white
• Front and rear 3-hose MU hose clusters with silver gladhands
• Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers
• Notched pilot faces with high mounted angled lifting slots
• Pilot-face mounted MU receptacle
• Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber
• Scale sectioned treadplate detail on walkways
• Accurate hood door and long hood detail
• “Post-1980” exhaust silencer
• See-through dynamic brake intakes with resistor grid detail
• See-through standard 48” dynamic brake fan housings with fan blades visible inside
• Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail
• Etched-metal radiator exhaust grills with radiator shutters visible underneath
• Separate radiator fan grab iron
• Underbody frame rail with separate plumbing and traction motor cables
• Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details
• Dimensionally accurate truck centers
• Speed recorder first axle, left side
• Forward facing handbrake chain mount for Flexicoil trucks
• Four-hole SP jacking pads
• Spare knuckle holders on fuel tank near fuel filler
• Sill-mounted EFCO
• Frame-mounted bell
• Double Graham-White (Prime) brand 975-075 (can style)
• Standard air tanks
• 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe 
• Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more
• Motor with 5-pole skew wound armature
• Dual flywheels
• All-wheel drive
• All-wheel electrical pick-up
• Printing and lettering legible even under magnification
• Operates on Code 70, 83 and 100 rail
• Packaging safely stores model
• Minimum radius: 18”
• Recommended radius: 22”

DCC & sound equipped locomotives also feature:

• ESU LokSound 5 DCC & Sound decoder with “Full Throttle”
• Dual cube-type speakers
• EMD 16 Cylinder 645E3 prime mover
• ESU designed “PowerPack” with two super capacitors****
• Operates on both DC and DCC layouts*****

DCC & sound ready locomotives also feature:

• Operate using DC*****
• DCC ready with 21-pin connector

* Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC

** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

*** Class lights illuminate in white color only in DC operation. Access and changing colors an ESU decoder with appropriate programming while operating using DCC

**** “PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

*****Lombard Hobbies Recommendation - As modelers ourselves we highly recommend ONLY running DCC on DCC systems and DC on DC systems, regardless of 'Dual-Mode' capability. This gives optimum performance and safeguards the unit from possible damage from running on a different system than originally intended and from any inexperienced operator errors. 

Prototype History:

The unique EMD SD40T-2, known simply as the “Tunnel Motor,” was the backbone of the Rio Grande and Southern Pacific fleets during the 1970s and 1980s. They were distinguished by the large see-through radiator grilles at the rear of the locomotive just above the walkway.

The SD40T-2 quickly became a fixture on the Southern Pacific, with a total of 240 units built for SP (and its Cotton Belt subsidiary) between 1974 and 1980. Built in multiple groups over that time period, they would exhibit various customer option differences, as well as EMD production differences. The first SD40T-2s, SP 8300-8306, and 8350-8356, were equipped with 116” long extended low short hoods to house Locotrol electronic equipment for remote control helper operations. Subsequent deliveries of units equipped with extended “snoot” low short hoods would measure 123” in length, reflecting EMD design changes across the product line. All SP/SSW units featured a large air conditioner housing on the cab roof (a welcome relief in the arid southwest), a 3-chime Nathan P3 airhorn offset to one side of the number board housing, and in the case of the Locotrol-equipped snoots, additional antenna ground planes and related cable conduits on the cab roof.

And of course, the units would be equipped with SP’s traditional Pyle-National “Gyralite” signal light package; while the SP 8300-8306, 8350-8356 only had signal lights on the front, changes to signal light policy saw all subsequent orders equipped with these safety appliances front and rear. The dual clear Gyralite assembly was intended to supplement the standard dual sealed-beam headlights as an attention-getter for motorists and pedestrians, while the single red-lensed Gyralite was meant as a safety feature for other trains. Tied into the brake system, when brake pressure suddenly dropped, in an emergency brake application, as might happen when brake lines parted in a derailment or other mishap, the red Gyralite would automatically illuminate, extinguishing other headlights in the process, as a warning to trains on adjacent tracks that the train was in emergency, and to be wary of derailed equipment possibly fouling the tracks.

Popular with engine crews and maintenance forces alike, the SD40T-2 would form the backbone of the SP and Rio Grande locomotive fleets well into the 1990s. Physical changes would appear to their fleets over the years; as a cost-cutting measure during the mid 1980s, as SP was struggling during an economic downturn, as well as the failed SPSF merger, the distinctive Gyralite signal lights, with their electric motors and moving parts, started to be removed, replaced by Prime Stratolite “digital” rotary beacons on the cab roof. Also deleted were the expensive engineer’s side “L” front cab windows, replaced by cheaper, more standardized pieces of impact-resistant glazing.

Into the 1990s, the SD40T-2s soldiered on. In 1991, the SP “Speed Lettering” paint scheme was introduced, with elements taken from both SP and Rio Grande. With a backlog of tired units needing overhauls and fresh paint, only a relatively small number of SP and Rio Grande SD40T-2s would be repainted into the striking new livery, but they looked sharp amongst a sea of grungy locomotives. While the new livery showed promise for a railroad that had struggled throughout the 1980s and was seemingly getting back on its feet in the 1990s, it was to be short lived, as Union Pacific would acquire Southern Pacific in 1996, with the merger taking effect on 9-11-96. As with past merger acquisitions, UP quickly absorbed the combined SP/SSW/DRGW SD40T-2 fleet, with many receiving coats of UP Armour yellow and gray. Others would receive new UP-system numbers in the form of a “patch” over their old numbers.

Lombard Hobbies - Your #1 Largest Authorized ScaleTrains Select Retailer!