ScaleTrains HO
ScaleTrains Rivet Counter HO SXT39748 DCC Ready EMD SD45 Phase IIb Chicago & NorthWestern 'Original Yellow (OY)' CNW #969
- In Stock:
- 1
- Scale:
- HO
- SKU:
- SXT39748
Description
Please note picture is representative of the item but may not be same road number. Always refer to product description for actual product details.
ScaleTrains Rivet Counter HO SXT39748 DCC Ready EMD SD45 Phase IIb
Chicago & NorthWestern 'Original Yellow (OY)' CNW #969
Road Number Specific ScaleTrains
- New road numbers
- CNW series 937-977, built 1-2:69,Phase IIb
- Road number 950
- Era: 1988 to 1994 appearance
- LED-lit Tomar 804-72 Strobe*
- Lost-wax brass Leslie RS-3L-R three-chime horn; mounted center rear of number board housing
- “Whip” antenna mounted on top of numberboard housing
- Front and rear angled uncoupling levers with loop handles and four inner brackets
- Detailed Flexicoil-C (high/low-mount brake cylinder truck on front, high-mount brake cylinder truck on rear) trucks with Hyatt bearing caps and sanding lines and brackets
- ATS Pickup shoe on 1st axle on right side of locomotive
- Road numbers 954
- Era: mid 1980’s to 1994
- LED-lit Tomar 804-72 Strobe*
- Lost-wax brass Leslie RSL-3L-R three-chime horn; mounted center rear of number board housing
- Small Sinclair Excalibur “ice skate” antenna (communications) mounted on dust bin
- Front and rear angled uncoupling levers with loop handles and four inner brackets
- Detailed Flexicoil-C (high and low mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
- Road numbers 955 and 971
- Era: mid 1970’s to early 1980’s
- LED-lit Federal-Standard #372 Rotary Beacon*
- Lost-wax brass Leslie RSL-3L-R three-chime horn; mounted center rear of number board housing
- “Whip” antenna mounted on top of numberboard housing
- Front and rear straight uncoupling levers with four brackets
- Detailed Flexicoil-C (high-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
- ATS Pickup shoe on 1st axle on right side of locomotive
- Road number 957
- Era: 1980’s appearance
- LED-lit Tomar 804-72 Strobe*
- Lost-wax brass Leslie RSL-3L-R three-chime horn; mounted center rear of number board housing
- “Whip” antenna mounted on top of numberboard housing
- Front and rear angled uncoupling levers with loop handles and four inner brackets
- Detailed Flexicoil-C (high-mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
- ATS Pickup shoe on 1st axle on right side of locomotive
- Road number 969
- Era: mid 1970’s to mid 1980’s
- LED-lit Federal-Standard #372 Rotary Beacon*
- Lost-wax brass Leslie RSL-3L-R three-chime horn; mounted center rear of number board housing
- “Whip” antenna mounted on top of numberboard housing
- Front and rear angled uncoupling levers with loop handles and four inner brackets
- Detailed Flexicoil-C (high and low mount brake cylinder) trucks with Hyatt bearing caps and sanding lines and brackets
- ATS Pickup shoe on 1st axle on right side of locomotive
- Fully-assembled
- Multiple road numbers
- LED-illuminated ground lights on both sides of locomotive*
- LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct*
- LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket**
- Front EMD-style low pilot snowplow with MU hose doors and grab irons, rear MU hose catch tray.
- Front and rear early small deck extension
- Pivoting front and rear drop steps
- "Tall" stepwells with see-through steps
- “Late” pattern walkway treadplate
- Latched battery box doors with narrow louvers
- Latched cab sub-base doors with early hinges
- 81” low short hood with sandbox cleanout plugs and no handbrake
- Standard EMD high headlight in numberboard housing
- Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top
- “35-Line” cab with standard front windshields
- Tall square corner clear wind wings mounted fore and aft of cab side window on both sides of cab
- Standard EMD sunshades mounted on short sunshade tracks
- Standard EMD arm rests
- No cab vents
- Standard electrical cabinet seam and bolted alternator door
- Small ECAFB
- Early (smooth) blower duct housing
- Standard-height dust bin
- Standard-height exhaust stack
- Non-dynamic brake
- “Chickenwire radiator grilles with rectangular-pattern mesh screens
- Standard-height fan housings
- Photoetched concentric ring fan grilles
- Winterization hatch over first radiator fan housing
- Long walkway duct with three short stanchions
- Handrail set with pilot face mounted outer end rail stanchions
- 3-hose MU hose clusters with silver gladhands
- Late deck-mounted MU receptacle
- Tall “zig-zag” pilot face
- Pilot face bracing detail behind stepwells
- Tall jacking pads with holes
- Sill-mount EFCO button
- Nose mounted Western Cullen Hayes “Gong” Bell
- Salem air filter (accordion style)
- 4,000-gallon fuel tank with single fuel filler, single vertical fuel gauge, and round dial fuel gauge per side
- Speed recorder second axle, left side
- ACI labels attached to long hood sides
- Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more
- Motor with 5-pole skew wound armature
- Dual flywheels
- All-wheel drive
- All-wheel electrical pick-up
- Directional LED headlights
- Printing and lettering legible even under magnification
- Paint colors match Tru-Color Paint color: TCP-353 CNW Early Yellow, TCP-109 CNW Green
- Operates on Code 70, 83 and 100 rail
- Packaging safely stores model
- Minimum radius: 18”
- Recommended radius: 22”
DCC & sound equipped locomotives also feature:*****
- ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions
- Two (2) cube-type speakers
- Turbocharged EMD 20 Cylinder 645E3 prime mover
- ESU designed “PowerPack” with two super capacitors***
- Operates on both DC and DCC layouts*****
DC/DCC & sound ready locomotives also feature:*****
- Operable using a DC power pack
- DCC-ready with 21-pin connector*****
* These lighting features will only function in with an ESU DCC decoder installed and operating in DCC.
** Class lights will only come on in white color in DC operation. Access to other colors and the ability to change colors is on accessible with an ESU DCC decoder installed and operating in DCC.
*** “PowerPack” feature only compatible with ESU decoders operating on a DCC layout.
*****Lombard Hobbies Recommendation - As modelers ourselves we highly recommend ONLY running DCC on DCC systems and DC on DC systems, regardless of 'Dual-Mode' capability. This gives optimum performance and safeguards the unit from possible damage from running on a different system than originally intended and from any inexperienced operator errors.
Prototype History:
Entering production in 1966, the SD45 was popular with many Class 1 railroads of the era, with many seeing lengthy careers with their original or secondhand owners. Many SD45s, including rebuilt variants, would operate well into the 2000s.
Lombard Hobbies - Your #1 Largest Authorized ScaleTrains Select Retailer!