Please note picture is representative of the item but may be different. Always refer to product description for actual product details.
Micro Trains N
Micro Trains Line N 00132110 (1155) Locomotive Coupler Conversion Kit with Pilot Face GP7/9 - 1 Pair
Scale: N
SKU: MTL 132110.00
Micro Trains Line N 00132110 (1155) Locomotive Coupler Conversion Kit with Pilot Face GP7/9 - 1 Pair
001 32 110 is formerly MTL Part Number 1155
Package includes one front and one rear coupler.
This conversion fits: Atlas / Kato: GP-7, GP-9 Locomotives (before 1995).
This kit includes a pair of 001 01 009 couplers for curved track of 12” radius or more, plus a pair of 001 01 007 knuckle & lip shanks for use on layouts with radii of less than 12-inches. Use the coupler that best fits your particular need. The coupler is assembled. If using the knuckle & lip shanks, disassemble the coupler & install the knuckle & lip shanks in the draft gear box. (Fig. 1).
This conversion requires the use of a #62 (.038” or .96mm) dia. tap drill, a #56 (.046” or 1.2mm) dia. clearance drill, and a 00-90 tap These tools are available in Micro Trains Line N 98800121 (1059) Tap and Drill Set
Don’t forget these other helpful tools for your MicroTrains coupler installations:
Need a MTL Coupler or Part You Don't See? We get shipments in weekly and can have the item you need fast. Just place a special order with us by clicking here.
Lombard Hobbies - Modelers Helping Modelers for Over 40 years!
Micro Trains Line N 00132110 (1155) Locomotive Coupler Conversion Kit with Pilot Face GP7/9 - 1 Pair
001 32 110 is formerly MTL Part Number 1155
Package includes one front and one rear coupler.
This conversion fits: Atlas / Kato: GP-7, GP-9 Locomotives (before 1995).
This kit includes a pair of 001 01 009 couplers for curved track of 12” radius or more, plus a pair of 001 01 007 knuckle & lip shanks for use on layouts with radii of less than 12-inches. Use the coupler that best fits your particular need. The coupler is assembled. If using the knuckle & lip shanks, disassemble the coupler & install the knuckle & lip shanks in the draft gear box. (Fig. 1).
This conversion requires the use of a #62 (.038” or .96mm) dia. tap drill, a #56 (.046” or 1.2mm) dia. clearance drill, and a 00-90 tap These tools are available in Micro Trains Line N 98800121 (1059) Tap and Drill Set
Don’t forget these other helpful tools for your MicroTrains coupler installations:
Need a MTL Coupler or Part You Don't See? We get shipments in weekly and can have the item you need fast. Just place a special order with us by clicking here.
Lombard Hobbies - Modelers Helping Modelers for Over 40 years!
