Atlas N
Atlas Master Silver Series N 40005196 DCC Ready EMD SD50 Locomotive with Ditchlights Lake State Railway LSRC #6355
- In Stock:
- 3
- Scale:
- N
- SKU:
- ATL40005196
Description
Please note picture is representative of the item but may not be same road number. Always refer to product description for actual product details.
Atlas Master Silver Series N 40005196 DCC Ready EMD SD50 Locomotive with Ditchlights Lake State Railway LSRC #6355
EMD introduced the SD-50 in the early 1980s with a 16 cylinder, 3500 h.p. engine to attain the power that they had earlier gotten from a 20 cylinder locomotive. The new, longer frame allowed the dynamic brake resistors to be relocated to a cooler area found between the central air intake and the cab.
The SD-60 varied little from its predecessor visually, the main changes taking place internally with the aging 645F engine being replaced by the 710G. The two locomotives can be distinguished by the door panels; the SD-50 features four latched doors in six door panels whereas the SD-60 has six latched doors in eight door panels.
The 'wide nose' or 'safety cab' was first offered as an option to US railroads in 1988. Union Pacific received the first units in early 1989. In 1991, the contour of the nose was changed slightly, going from a 3-piece to 2-piece windshield and tapering the sides of the nose to improve visibility for the crew. Burlington Northern was the first recipient of the revised model.
Features:
- Deck or pilot mounted ditch lights as appropriate per the prototype
- Directional lighting
- Separate plow and winterization hatch that can be installed by the modeler
- Blackened wheels
- Slower speed motor for closer to scale speeds
- AccuMate magnetic knuckle couplers
- Golden-White LEDs
- DCC Models are equipped with NCE Decoders
Silver Sound Ready**
- Atlas Silver Sound Ready models are equipped with a speaker for easy conversion to sound with the addition of a decoder.
DCC OPERATION FEATURES (GOLD LOCOMOTIVES ONLY)**:
- Supports all DCC-programming modes
- DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
- Flexible mapping of function keys F0 to F28.
- A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
- Follows all NMRA DCC standards and recommended practices.
SOUND FUNCTIONALITY FEATURES (GOLD LOCOMOTIVES ONLY)**:
- Over 20 sound effects are available, including engine start-up and
shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more. - There are up to 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Equipped with ESU’s Exclusive 'Full Throttle' features for ultimate realism in prototype running.
**Lombard Hobbies Recommendation - As modelers ourselves we highly recommend ONLY running DCC on DCC systems and DC on DC systems, regardless of 'Dual-Mode' capability. This gives optimum performance and safeguards the unit from possible damage from running on a different system than originally intended and from any inexperienced operator errors.
Lombard Hobbies = Big Inventory ∙ Value Pricing ∙ Fast Shipping ∙ Great Service